Vehicle Speed Limiter Built-in GPS Tracker With Dual Speed limiting
1. Basic Introduction
The Terrain-Based Dual Speed Limiter regulates speed based on
terrain at two different speeds. It switches over to secondary
speed by detecting the vibration of the vehicle. These two preset
speeds can be set individually. A 6-axis vibration- sensor is used
to detect the terrain type. It is also a driving recorder and can
record 72 hours over speeding data. The limiting speed can be
adjusted from 0 km to 120 km by Administrator.
For example:
Speed1 for flat road [60~120KM]
Speed2 for bad t road [40~100KM]
2. Product Parameters:
Rang of speed limiting: 0-120km/h
Speed controlling band: ±3km/h (or±5%)
Anti-vibration character: 20~50Hz
Rated power dissipation: 2w
Working Voltage DC: 6.8~60V
Working Temperature:-40~85°C
Humidity: 10% to 90%
3. Product Features:
1) Speed Limiter with LCD display to display speed, with plastic
housing,anti drop and anti smashing.
2) Without GPS, it will get the current driving speed from the
vehicle Speed Signal Wire only.
3)When vehicle speed signal wire is disconnected, the vehicle’s
speed will be limited to 40KM/H by default( The built-in GPS will
detect the speed and do the limit)
4)3D acceleration sensor to detect the road conditions by shaking
level.
5)Rang of speed limiting:
Speed1 for flat road 80KMH
Speed2 for rough road 100KMH
6) Easy calibration of the speed
7) Limiting the speed without affecting the functionality of the
vehicle
8) Buzzer Warning for over speeding (Continuous sound)
9) Vibration Resistance
10) An overload protection prevent the circuit board from being
damaged
11) Warning sound (Intermittent beeping) at 95% of the speed limit
4.Device Panel Introduction
The device has 3 working modes, working mode, setting mode,
sleeping mode , No speed and no shake , it will enter sleep mode ,
close screen and Status light , only power LED light is on, as blow
For working mode and setting mode , There are 4 parts on the panel
while device is in working mode or setting mode
| Index | Working mode | Setting Mode |
| ① | Shaking Level (0~4) | Function number (1~6) |
| ② | Speed of vehicle | Details of parameters note: (1km=637 *n, n is different with different brand vehicle, n=2,4,6,8,10,12,14,16) - Calibrate odometer(increase)
- Shake level {1~4}]
- Relay working time while over speed [3~30s]
|
| ③ | Indicator of working status - Sleep mode: off
- Flat road : on
- Bad road : blink per 1s
| |
| ④ | Power indicator - No power—OFF
- Power is well-- ON
| |
4 Installation
